|
Pentium D Servers
1320
Xeon® Servers
1520
1820
Itanium® Servers
6440
Storage
9316 NAS
You
can contact us at
sales@californiadigital.com
or call 1-888-546-8948 for more
information.
|
Software
- Red Hat Linux 9-based install or
- Debian-based install or
- Red Hat Enterprise Linux (official version)
Motherboard:
Memory:
The 1620 uses 1GB or 2GB ECC PC-2100 RAM operating
at 266MHz.
Supported configurations range from 1GB to 12GB.
RAM is interleaved (must be added in pairs) and
provides 4.2GB/s RAM-to-CPU bandwidth.
Processor Support:
- 3.2GHz Intel Xeon Processor(1MB or 2MB cache)
- 3.06GHz Intel Xeon Processor(1MB or 512K)
- 2.8GHz Intel Xeon processor(1MB or 512K)
All these processors operate at a 533MHz front side bus speed.
These are 32-bit Xeon DP processors. They should
not be confused with the Xeon MP (4-way)
processor or the newer 64-bit-capable Xeons.
PCI Slots:
- One full-height 64-bit/133MHz PCI-X slot
- One low-profile 64-bit/133MHz PCI-X slot
Disk Controller:
- Integrated IDE controller
- Ultra 320 AIC 7902 SCSI controller (for SCSI model)
CD/FDD Devices:
- IDE CD-ROM drive (optional)
- Floppy + CD-ROM combo (optional)
- Floppy drive only (optional)
Graphics Subsystem:
- Integrated ATI XL Rage PCI Controller (8MB)
Drive Bays:
- Two 3.5" internal drive bays (IDE or SCSI)
Networking:
- Intel 82546 EB Dual 10/100/1000 Ethernet
Remote Management:
- IPMI 1.5 compliant
- Certified with California Digital's freeIPMI
libraries/shell
Support:
- California Digital Total Linux Coverage
- One year return-to-depot servicing
- On-site support (optional)
Physical specifications:
- Maximum: 42 lbs/ 19 kg
- Height: 3.5" (1U)
- Width: 17.1" (fits standard 19" rack)
- Depth: 29"
California Digital recommends that the 1620 be installed in 1000mm
deep racks.
Mounting Hardware:
- Four-post or centermount (standard)
- Slide rails (optional)
|
